Gearbox beam BMW ZF / Getrag - Volvo 740/940
Andersson Steel Speed

Reviews
Help others choose right. Be the first to write a review!
Write a reviewGearbox beam BMW ZF / Getrag - Volvo 740 / 760 / 940 / 960
This new generation gearbox beam fits bolt on in the Volvo 700 and 900 series and can be attached in many ways longitudinally and therefore now fits most variants of manual gearboxes from BMW. Both 5 and 6-speed gearboxes from both ZF and Getrag. For the later 6-speed gearboxes from around –00 with a loose bracket at the rear of the gearbox, you need to supplement with our bracket AS-002004-10.
Also fits the BMW DCT gearbox GS7D36SG if you supplement with our bracket AS-002004-11.
See example pictures with dimensions to check that it fits your gearbox.
This new gearbox beam is made to fit bolt on with our safety ring for the cardan AS-002010-01.
NOTE!
– The larger gearboxes usually require cutting away certain castings in the gearbox and also knocking out space in the gearbox tunnel.
– Always check that the cardan runs in a straight line against the support bearing after installation. Otherwise, the hardy disc may wear out prematurely.
– There are different inclinations on BMW's petrol and diesel engines. But you can e.g. do not put a diesel gearbox on an M50 even if they fit together because the gearbox will then tilt 10 degrees if you do not weld it.
– If the gearbox used is modified with a new sweep that is welded, this must be well done and with the correct inclination for it to fit perfectly.
Examples of gearboxes with fixed rear attachment that fit:
S5D-250G
S5D-260Z
S5D-310Z
S5D-320Z
GS5-39DZ
S6S-420G
Examples of gearboxes that fit where you need to supplement with a rear loose attachment on the gearbox:
GS6-37DZ or -BZ
GS6-53DZ or -BZ
GS7D36SG
You can find the rubber buffer as a spare part here.
----------------
Guides & Info
Bilmärke | BMW |
Bilmärke | Volvo |
Bilmodell | 700 |
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.